Diesel Power

Thanks for your interest in Aartech’s offerings to the diesel power generation field. Whether you are a DG Set manufacturer, consultant, EPC contractor, project planner, system integrator or research / design / operation / maintenance / testing / commissioning engineer, we hope that you find our solutions of interest and look forward to hear from you.

Due to cost considerations, diesel power generation is normally considered as a standby / backup / emergency source of power and are often the last line of defense before a significant problem takes place for a facility. It is therefore imperative that every aspect of its operation and maintenance is diligently managed.

RELIABLE ENGINE STARTING

It is observed that standby / backup / emergency DG sets may not operate on demand due to problems in the batteries, maintenance issues etc.

Aartech’s KranKing Utlracapacitors can provide reliable engine starting solutions to ensure robust electrical support to the batteries at the time of engine cranking. A portable jump start system can also effectively provide for an arrangement to support the operations of multiple DG sets in a DG plant.

LOAD LIMITING

Standby / Backup / Emergency power may not be rated to support the full load on a system.  Since the source is limited, if the load exceeds the supply beyond its ratings, the entire system may trip. Moreover, since many such installations aim at providing basic facilities such as lighting which are modest in their load requirement, it is very attractive to consider load limiting from a technical, operational as well as commercial standpoint.

Aartech offers industry rugged LoadChecker solutions to these issues with low rating (< 100W) load limiters at a very affordable cost which are field proven with 1000’s in service.

CONTROL & AUTOMATION

Aartech’s Control & Relay Panels (CRP) SSD is organized to offer specialized custom built, integrated software engineered solutions involving aspects of protection, metering, communications and control for distributed automation, SCADA and remote telemetry based control and automation solutions.